Trunnion Mounted ball valve
Stainless steel 600lbs trunnion Mounted? ball valve with gearbox
Design standard: ANSI B16.34 / API600
Body material: stainless steel CF8M
Ball Material: SS316
Nominal diameter: DN150? 6”
Pressure: 600LBS
End connection: Flanged Ends ANSI B16.5
Seal: PTFE RPTFE
Face to face: ANSI B16.10
Mode of operation: Gearbox+ handwheel
Test and inspection: API 598.
Key Specifications / Features
silica sol precision casting
Full bore or reduced bore;
Low emission packing;
anti-static and anti-blowout stem design;
Optional gearbox, Lever , pneumatic actuator, electrical actuator
Optional ISO 5211 top flange bare shaft.
Size Range: 2”-24”
Pressure Range: 150LBS 300LBS, 600LBS, 900LBS , 1500LBS
Optional Construction: 3pcs, 1pcs, 2pcs body.
Floating Ball Design or Trunnion Mounted ball.
Optional Ends: flanged RTJ RF FF, NPT, BSP.
Optional seal: PTFE, RPTEF, NYLON, PEEK, Metal Seated
Available Body Material: WCB/WCC /LCB/CF8M/4A/5A/Alloy Steel
Available Ball : SS304, SS316, Solid Type, A105+ENP.
Pressure Range: 150LBS-1500LBS , PN10-PN250
Size Range: 2”-24” DN50-DN600mm
1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length.
2. Simple structure, small size and light weight.
3. It is tight and reliable. the sealing surface material of the ball valve is widely used in plastics and has good sealing performance, it is widely used in the vacuum system.
4. Easy to operate and open and close quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for remote control.
5. The maintenance is convenient, the structure of the ball valve is simple, the sealing ring is generally movable, and it is convenient to disassemble and replace.
6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes.
7. Wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied from high vacuum to high pressure. When the ball rotates 90 degrees, it should show a spherical surface at the entrance and exit, so as to cut off the flow.
1. City gas: gas export pipelines, main trunk lines and various branch supply pipelines, etc.
2. Centralized heating: output pipelines, main lines and branch lines of large heating equipment.
3. Heat exchanger: open and close the pipeline and each circuit.
4. Iron and steel plants: various fluid pipelines, exhaust gas selective discharge pipelines, gas and heat supply pipelines, and fuel supply pipelines.
5. All kinds of industrial equipment: all kinds of heat treatment pipelines, all kinds of industrial gas and heating pipelines.
