<kbd id="k8qme"><code id="k8qme"></code></kbd>
<kbd id="k8qme"></kbd>
  • <s id="k8qme"><dd id="k8qme"></dd></s>
    <abbr id="k8qme"></abbr>

    Check Valve BS 1868, API 6D, API 602

    Check Valve BS 1868, API 6D, API 602

    A check valve prevents potentially damaging backflows to protect equipment like pumps and compressors. Non-return valves allow the flow of the fluid in one direction only and block reverse flows. This type of valves is available with cast and forged bodies (BS 1868, API 6D, API 602) and in several designs as swing, ball, lift, stop and piston designs.

    CHECK VALVE DEFINITION
    CHECK VALVE TYPES
    STOP CHECK
    SUMP PUMP TYPE
    CHECK VALVE DEFINITION

    Briefly said, a check valve is a protection device that prevents the fluid from flowing in an unwanted direction within the piping system or the pipeline (as backflows may damage upstream equipment).

    How does a check valve work?

    The valve lets the fluid flow in the desired direction only (if there is enough pressure), and blocks any flow in the opposite direction. Also, the valve closes automatically when the pressure drops. It is therefore critical that the valve is installed with a proper orientation!

    Note that this type of valve accomplishes its scope without external forces or actuation. This is a key difference vs. gate or globe valves, that need an external force to work (level, wheel, gear or actuator).

    The key specifications that cover this type of valve are:
    BS 1868: standard type, in carbon and alloy steel.
    API 6D: for pipelines.
    API 602 / BS 5351: forged steel (swing, ball, piston).
    API 603: stainless steel stop type.
    ASME B16.34 (pressure and temperature ratings).
    ASME B16.5/ASME B16.47 (flanged end connections).
    ASME B16.25 (butt weld connections).
    Cast steel valves are available with flanged and butt weld ends.
    Forged, small size, valves are available with threaded and socket weld connections.

    These valves are represented by the following symbol in piping P&ID diagrams: Symbol for check valve in P&ID diagram

    check-valve-bs

    CHECK VALVE TYPES

    Check valves are available in different types which accomplish the function described above with different disc (ball, clapet, piston, etc) designs. Let’s take a closer look to each type.

    SWING CHECK VALVE
    This type has the simplest design and operates via a metallic disc ("Clapet") attached to a hinge at the top. As the fluid passes through a swing valve, the valve is open. When a reverse flow occurs, the changes in motion as well as gravity help to pull down the disc, closing the valve and preventing backflows.
    Swing valves are used for firefighting and flood prevention in sewage systems. They’re also designed to work with materials such as gas, liquids, and other types of media.

    check-valve-bs1

    STOP CHECK

    Stop-check can start, stop, and regulate the flow of fluids while preventing dangerous backflow that may damage other equipment like pumps and compressors.
    When the pressure in the system is below a certain value, this valve closes automatically to blocks reverse flows. Generally, this type of valve has an external override control to close the passage of the fluid manually (similarly to a gate valve).
    Stop-check valves are very common in power plants, boiler systems, and oil & gas refining, hydrocarbon processing, and high-pressure safety services.

    BALL CHECK VALVE
    A ball check valve features a spherical ball positioned inside the body that opens and closes the passage of the fluid in only a wanted direction.
    The ball rotates freely when the fluid passes through the pipeline in the desired direction. If the pipeline is subject to a pressure decrease or a reverse flow, the ball inside the valve moves towards the seat, sealing the passage. This design suits viscous fluids.

    check-valve-bs2

    All check valves belong to the family of "lift valves", and have a seat design similar to globe valves.
    A variant of the ball design is the so-called piston type. This type of valve is used for high-pressure services where the fluid can change direction suddently and with good force (this due to the fact that the disc is precisely guided and fits perfectly into the seat).
    Ball and piston check valves can be installed both horizontally and vertically.

    DUAL PLATE
    Dual plate check valves, covered by the API 594 specification, are frequently used to protect pumps, compressors and other mechanical equipment.

    PRESSURE SEAL
    This type features a special design cover able to withstand high pressures.

    check-valve-bs3

    SUMP PUMP TYPE

    A new check valve shall be installed anytime a new sump pump is placed into operation. This due to the fact that older protection valves may have been damaged by previous open/close operations or by corrosion and the risks of damaging a new sump pump exceed by far the cost of a new check valve!

    A sump pump valve prevents backflows into the sump pump when the device is switched off by an operator or by an automated control system. Without a check valve, the fluid may return into the sump pump and oblige it to move the same fluid multiple times, burning it out prematurely.

    Therefore, to extend the life cycle of a sump pump, a non-return valve should always be installed.


    Post time: Oct-26-2019
    主站蜘蛛池模板: jazzjazz国产精品一区二区| 夜夜精品无码一区二区三区| 国产情侣激情在线视频免费看| 免费一级做a爰片性色毛片| 三上悠亚电影在线观看| 国产精品网址你懂的| 污片在线观看网站| 成人影片麻豆国产影片免费观看| 国产av人人夜夜澡人人爽麻豆| 久久99青青精品免费观看| 色偷偷88888欧美精品久久久| 无码国产乱人伦偷精品视频| 国产成人综合久久亚洲精品| 亚洲成AV人综合在线观看| 一级做a爱片久久蜜桃| 色婷五月综激情亚洲综合| 抽搐一进一出gif日本| 国产免费一区二区三区不卡| 久久天天躁狠狠躁夜夜网站| 色综合久久综合网观看| 成人影院wwwwwwwwwww| 免费a级毛片永久免费| 91香蕉在线看私人影院| 欧美午夜精品久久久久久浪潮| 在线观看免费人成视频| 农村乱人伦一区二区| 两个小姨子韩国| 男同免费videos欧美| 国内久久精品视频| 亚洲视频在线观看免费视频| おきた冲田あんずなし杏梨| 波多野结衣中文字幕一区| 国产精品午夜福利在线观看地址| 久热这里只有精品视频6| 欧美性另类高清极品| 欧美丰满白嫩bbwbbw| 国产精品高清一区二区人妖| 亚洲精品v天堂中文字幕| 99在线精品免费视频| 爽好大快深点一视频| 在线播放一区二区|