Cast Iron Globe & Strainer G-H-01
Flanged? cast iron ANSI? globe valve with bronze seated? Design standard: BS /ANSI Body material: cast grey iron GG25 Seat/Plug: ductile iron +bronze Nominal diameter: 4″ Pressure: PN16/150LBS? End connection: flange RF Face to face: BS standard Working temperature: -30℃~+300℃. Test and inspection: API 598. Product Range Size: 1/2″-16″ DN15-DN400 Connection: Flange to EN1092-1 Epoxy Power Coated inside and outside with 300 microns Peformance/Features ?PN10/PN16/150LBS? Metal Seated Globe Valve is operating by the Brass seated iron disc ? Moving perpendicular to the flow axis through a worm machined stem multi turned ? Tight sealing is achieved through Brass seated on wedge fully contacting.?The body seated ring, Leakage Grade is up to Grade B as Min. ? In each time the valve is opened, the flow on the line cleans the sealing surface, Prevents from dirt and deposits ? With its short installation length( DIN3202 F1), doesn’t occupy a big place ? It has ductile iron body and stainless steel stem ? Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy ? Suitable to install actuator and gearbox ? Suitable to use with ground and underground applications. Can be operated with extension spindle ? Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed
Available material of the body: GGG40, GGG50, ASTM A536 Available seat seal: Stainless steel 304, SS316. Bronze. Brass, Gunmetal Pressure Range: PN6, PN10 PN16 150LBS Size Range: DN15-DN450 Optional Face to Face Design: ANSI BS customized
PN10/PN16/150LBS Metal Seated Globe Valve is operating by the Brass seated iron disc ? Moving perpendicular to the flow axis through a worm machined stem multi turned ? Tight sealing is achieved through Brass seated on wedge fully contacting.?The body seated ring, Leakage Grade is up to Grade B as Min.? ? In each time the valve is opened, the flow on the line cleans the sealing surface,?Prevents from dirt and deposits? ? With its short installation length( DIN3202 F1), doesn’t occupy a big place? ? It has ductile iron body and stainless steel stem? ? Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy? ? Suitable to install actuator and gearbox? ? Suitable to use with ground and underground applications. Can be operated with extension spindle? ? Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed
Hot Water, Cold Water, Sewage Water, Fluids without acidity or alkalinity properties
