Big size single check Valve CVS-40-40F
Quick Detail:?DN1000 PN40 Eccentric single disc check valve with flanged ends RF,
Design standard: API600 API594
Construction: Eccentric disc check valve with flange ends
Body material: carbon steel WC6
Disc: 1.0619
Seat: 1.0619
Nominal diameter: DN1000 40inch
Pressure: PN40?
End connection: Flange RF
Working temperature: -29℃~+595℃.
Test and inspection: API 598.
?
Product Range
Available Material of Body: WCB/WC9/C5/CF8/CF8M/CF3M
Available Material of Seal: C WCB/WC9/C5/CF8/CF8M/CF3M
Available Material of Disc: WCB/WC9/C5/CF8/CF8M/CF3M
Available Material of spring: SS304/SS316/Inconel-750X
Optional Seat: Metal seated / Resilient Seated
Optional Operation: Lever Armed Hammer, Elec. actuator.
Pressure Range: 150LBS-300LBS/ PN6-PN25 /0.6Mpa-2.5Mpa
Size Range: 2”-48” DN50-DN1200.
?
Performance Feature:
- Economical Design: Low weight and short laying length produce savings in initial cost, space requirements, and installation when compared to full-body, swing type check valves
- Minimal Head Loss: Head loss is minimized by providing a short, straight and virtually unobstructed flow path.
- The spring-loaded disc is designed with very low cracking pressure which reduces the amount of energy required to open the valve
- Quick Closure to Reduce Water Hammer: Shut-off is achieve via the fully automatic, spring assisted disc that closes near zero flow velocity – the lightweight, sing disc design creates a positive shutoff prior to flow reversal which helps keep surges to a minimum
- Duration & High-Quality Design: The single check valve has a carbon steel body which allows it to perform well in higher temperature applications – units are epoxy painted
?
?
Available Material of Body: WCB/WC9/C5/CF8/CF8M/CF3M
Available Material of Seal: C WCB/WC9/C5/CF8/CF8M/CF3M
Available Material of Disc: WCB/WC9/C5/CF8/CF8M/CF3M
Available Material of spring: SS304/SS316/Inconel-750X
Optional Seat: Metal seated / Resilient Seated
Optional Operation: Lever Armed Hammer, Elec. actuator.
Pressure Range: 150LBS-300LBS/ PN6-PN25 /0.6Mpa-2.5Mpa
Size Range: 2”-48” DN50-DN1200.
- Economical Design: Low weight and short laying length produce savings in initial cost, space requirements, and installation when compared to full-body, swing type check valves
- Minimal Head Loss: Head loss is minimized by providing a short, straight and virtually unobstructed flow path.
- The spring-loaded disc is designed with very low cracking pressure which reduces the amount of energy required to open the valve
- Quick Closure to Reduce Water Hammer: Shut-off is achieve via the fully automatic, spring assisted disc that closes near zero flow velocity – the lightweight, sing disc design creates a positive shutoff prior to flow reversal which helps keep surges to a minimum
- Duration & High-Quality Design: The single check valve has a carbon steel body which allows it to perform well in higher temperature applications – units are epoxy painted
Depending on the material of the housing and the seal, the medium can be water, steam, gas, corrosive medium Quality, oil, food, medicine, etc. The working temperature range of the medium is between -196-800C.
?