BFV-1004 LUG Butterfly Valve
Quick Detail
Design standard: API 609.
Body material: DUCTILE IRON ASTM A536
Disc Material: CF8M SS316
Seat Material: EPDM
Nominal diameter: 28” DN700
Pressure: CL150 (PN20)
End connection: Lugged for ANSI B 16.9 flange
Face to face: EN558 Series 20
Top flange ISO5211.
Bi-direction Seal, Backup Rubber Seat
Mode of operation: Gearbox.
Test and inspection: API 598. EN12266
Available Body Material: GGG40, GGG50, CS, WCB, SS304, SS316
Optional Seat: EPDM, NBR, PTFE, Teflon. Neoprene
Optional End connection: Wafer, Lug, Flanged.
Optional Body Design: Eccentric or Concentric centerline
Face to face: EN558 Series 13/14, long type or short type
Normal diameter: 4″~96″ (DN100~DN2400).
Pressure range: 150lbs (PN10~PN25).
Available Operation: Gearbox, Electric, pneumatic actuator
Working temperature: -46℃~+200℃.
1. When installing the lug butterfly valve and the pipeline, the flanges on both sides are installed with bolts, so that the valve body and the sealing surface of the valve body are not squeezed by the bolts, which is beneficial to the seal life.
2. The lug can be easily installed in the unwinding position.
3. There is a certain defect in the connection method of the clip. When the bolt is used to install the valve in the pipeline, the bolt squeezes the entire butterfly valve body between the two flanges. The bolt is relatively long, and the resulting creep is also large, which is easy to leak.
It is widely used in petroleum, chemical, metallurgy, hydropower and many other fields
