High pressure flanged 2500LBS ball valve for LNG use (BV-02500-2F )
Quick Detail：High pressure flanged 2500LBS ball valve for LNG use
Design standard: API600
Body material: Forged Steel A105
Ball: A105+ENP
Nominal diameter: 2”
Pressure: 2500LBS
End connection: Flanged RTJ ANSI B16.5
Face to face: ANSI B16.10
Mode of operation: Gearbox ?
Test and inspection: API 598.
Working Temperature: -29℃~+425℃.
Side Entry Design
Spilt Body??
?
Key Specifications / Features
Reliable sealing performance and small torque;
Full bore and reduced bore;
Low emission packing;
Fire safe, anti-static and anti-blowout stem design;
Optional locking device
Optional ISO 5211 top flange.
Smooth Electroless nickel plated ball for bubble tight sealing and low operating torques
Bi-Directional flow
Double Sealing on stem, stem gland and closure connections
Seats insure low and high pressure sealing and body cavity self-relief
Seat Injection fitting with internal check valve for emergency sealing
?
Product Range:
Optional Construction: 3pcs, 1pcs, 2pcs body.
Full Bore/ Reducing Bore
Floating Ball Design or Trunnion Mounted ball.
Optional Ends: BW, flanged RTJ RF FF, NPT, BSP.
Optional seal: PTFE, RPTEF, NYLON, PEEK, DEVLON, Metal Seated
Available Body Material: ASTM A216WCB/LCB/CF8M/4A/5A/Alloy Steel
Available Ball : SS304, SS316, Solid Type, A105+ENP.
Pressure Range: 150LBS-1500LBS , PN10-PN250
Size Range: 2”-48” DN50-DN1200mm
Optional Construction: 3pcs, 1pcs, 2pcs body.
Full Bore/ Reducing Bore
Floating Ball Design or Trunnion Mounted ball.
Optional Ends: BW, flanged RTJ RF FF, NPT, BSP.
Optional seal: PTFE, RPTEF, NYLON, PEEK, DEVLON, Metal Seated
Available Body Material: ASTM A216WCB/LCB/CF8M/4A/5A/Alloy Steel
Available Ball : SS304, SS316, Solid Type, A105+ENP.
Pressure Range: 150LBS-1500LBS , PN10-PN250
Size Range: 2”-48” DN50-DN1200mm
Deye Trunnion mounted ball valves are built as standard in accordance with the design requirements of API 6D and, upon request, B16.34; both in two- and three-piece bolted construction.
Independent floating spring-loaded seat rings are always in contact with the ball to provide an effective tight seal at low differential pressures. At higher differential pressures, the upstream seat ring becomes pressure energized against the ball to ensure the seal, whilst the downstream seat remains spring loaded. The single sealing feature, standard on Trunnion mounted ball valves, is ideal for block and bleed service to API 6D.
The valve body cavity can be vented to atmosphere through a bleed valve and completely drained
by removing the drain plug with the ball in closed position, even when the line is pressurized. This feature also allows easy replacement of upper stem seal and the checking of the sealing of the seats while the valve is installed in the pipeline. All valves meet the antistatic requirements of BS 5351.and in compliance and certified to BS 6755 part 2 and API 607 IV Ed.
Mainly used in petroleum, petrochemical, chemical, metallurgy, electric power, water conservancy, urban construction, fire protection, machinery, coal and food industries
